* Please read instruction before using.
1. This 3D printing pen is suitable for children over 5 years old and adults, children must be accompanied by adult when using.
2. Do not touch the nozzle part when using.
3. Do not use filaments other than the original one or purchased from us, make sure that it's completely compatible.
4. Ensure that the filament is cut well before loading, or it may clog the nozzle when melting.
1.Connect to a USB port, the blue light is on. Press and hold the power button, it will turn to red and flash, when stop flashing, it's ready to work.
2. Press the load filament button and feed with filament, put the filament in the hole at the top of 3D printing pen and hold the loading filament button, it will load the filament automatically, when it's out from the nozzle, you can get started.
3. Adjust the speed control button according to your painting features, H/M/L different speeds for your choice.
4. Hold the load filament button and release where you'd like to stop. There may be a little more filament out of nozzle after pausing.
5. After finishing drawing, press the unload filament button to take out the left filament.
Output Voltage: 5V 2A
Input Voltage: 100-240V ~ 50 / 60Hz
Cord Length: About 1.2m
Filament Length: About 5m
Filament Type: 1.75mm PCL
Diameter of Nozzle: 0.7mm
Loading Speed: Adjustable
Heating Temperature: 70-100℃
1 x 3D Printing Pen
1 x Charging Cable
4 x Filament
1 x Picture Pattern
1 x User Manual
Why Choose Us?
All Our Products are produced under Strict Quality Inspection
12-Month Worry-Free Warranty and Free Life-time Technical Support
Professional After-Sales Team