Welcome to D Printer Filament
PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn't require a heated bed. It is the " default " recommended material for many desktop D printers. It has the following characteristics:
)Good toughness high strength, high stiffness
)No block nozzle, good stick hot bed, a smooth PLA used
)Low shrinkage, thermoforming dimensional stability
4)Accurate diameter: .5mm, variations + /-0.05mm, roundness +/-0.0mm
Frequently asked questions
) Filaments do not extrude properly?
A: Check the running extruder temperature is match with the temperature of the filament extrusion needed. If not, keep trying to set a appropriate temperature.
) How do I store my filament?
A: Sealing the filament in a dry storage can effectively prevent it brittle and crack cased by absorbing moisture from the air for a long term.
) Is your filament tangled?
A: Check the spool is installed correctly.